Epson CFS-900P Set up the Ink Bottles, Yellow Light Magenta Magenta Light Cyan Cyan Black

Insert the tubing into the tube clip and close it until it snaps shut. Don’t pinch any of the tubes.

Next, separate the tubes, or un-web them, so that they are separated all the way back to the beige tube clip you just installed.

Now you are ready for the ink bottles.

Step 8 – Set up the Ink Bottles

Find the ink bottles and the black Velcro Circles. Clean the back of each bottle with alcohol and wipe dry. Attach a Velcro Loop circle to the back of each bottle. Attach the mating Velcro circle to the piece on the bottle. Peal off the backing on the mating Velcro so the adhesive is exposed.

Take off the shipping caps and install the drilled caps. Each cap should have a hole in the center and a small vent hole in the Nalgene logo. Make sure the vent hole is there and that it is not blocked or obstructed.

Arrange the bottles as shown above. From front to back they should be in this order…..

Yellow – Light Magenta – Magenta – Light Cyan – Cyan – Black

When you press the exposed Velcro adhesive against the printer, the hook portion will stick to the printer and this becomes the permanent position for the bottle, so choose your bottle positions carefully.