You can set up and control the projector from a computer by using the
Web browser of a computer that is connected to the projector via a
network. Setup and control operations can be performed remotely if this
function is used. In addition, since you can use the computer's keyboard,
entering characters required for the setup is easier.
Use Microsoft Internet Explorer 6.0 or later as the Web browser. If using a
Mac OS, you can also use Safari.
q
Network items can be set if Communication On is set from Extended
- Standby Mode from the projector's Configuration menu, even if the
projector is in Standby Mode (when the power is off).
There are items that cannot be set via Web browser (but can be set from
the Configuration menu), and items that can only be set via Web browser.
Items in the Configuration menu that cannot be set by the web browser
All items in the Configuration Menu can be set with the exception of the
following items.
•Settings Menu - Pointer Shape
•Settings Menu - Test Pattern
•Settings Menu - User Button
•Registering a User's Logo using the Extended menu
•Extended Menu - Language
•Extended Menu - Operation - High Altitude Mode
•Extended Menu - Operation - Lens Cover Timer
•Reset Menu - Reset All, and Reset Lamp Hours
The items available on each menu are the same as the Configuration Menu
of the projector. s p.58
Items that can only be set in the Web browser
The following items can be set only in a Web browser.
•SNMP Community Name
•EasyMP Monitor password

Displaying Web Control

Display Web Control with the following procedure.
q
If your Web browser is set up to connect via a proxy server, Web
Control cannot be displayed. To use Web Control, you need to make
network connection settings with a device other than a proxy server.

Entering the IP address of the projector

Web Control can be opened by specifying the IP address of the projector as
follows when using Advanced Connection Mode.
Procedure
A
Start the Web browser on the computer.
B
Enter the IP address of the projector in the address input box
of the Web browser, and press the "Enter" key on the
computer's keyboard.
Web Control is displayed.
When Web Control Password is set in the Network menu from the
projector's Configuration Menu, enter the User name and Password.

Displaying Web Remote

By using the Web Remote function, you can perform projector remote
control operations via a Web browser.
Changing Settings Using a Web Browser (Web Control)
48