You can save the image that is currently being projected as a User's Logo.
q
When a User's Logo is saved, the previous User's Logo is erased.
Procedure
A
Project the image you want to use as the User's Logo, and then
press the [Menu] button.
Using the Remote Control Using the Control panel
B
Select Extended - "User's Logo" from the Configuration Menu.
s "Using the Configuration Menu" p.57
Check the buttons you ca n use and the operations they perform in
the guide under the menu.
q
•If User's Logo Protect from Password Protect is set to On, a
message is displayed and the user's logo cannot be changed. You can
make changes after setting User's Logo Protect to Off. s p.44
•If User's Logo is selected when Keystone, E-Zoom, Aspect, or
Progressive are being performed, the function currently being
performed is cancelled.
C
When "Choose this image as the User's Logo?" is displayed,
select "Yes".
q
When you press the [Enter] button on the Remote Control or the
Control panel, the screen size may change according to the signal as it
changes to the resolution of the image signal.
D
Move the box to select the part of the image to use as the
User's Logo.
Saving a User's Logo
52