Using the Remote Control Using the Control panel
q
You can save at 400 ^ 300 dots in size.
E
When "Select this image?" is displayed, select "Yes".
F
Select the zoom factor from the zoom setting screen.
G
When the message "Save this image as the User's Logo?" is
displayed, select "Yes".
The image is saved. After the image has been saved, the message
"Completed." is displayed.
q
•Once a User's Logo has been saved, the logo cannot be returned to
the factory default.
•Saving the user's logo may take approximately 15 seconds. Do not
use the projector or any connected equipment while it is saving,
otherwise malfunctions may occur.

Saving a User's Logo

53