Sub Menu Function
Auto Keystone Turn On to perform Auto Keystone.
(Auto Keystone is only executed when Front is selected from the Extended - Projection menu.)
Control Panel Lock You can use this to restrict operation of the projector's Control panel. s p.46
Pointer Shape You can select the shape of the pointer. s p.40
Pointer 1: Pointer 2: Pointer 3:
Power Consumption You can set the Lamp brightness to one of two settings.
Select ECO if the images being projected are too bright such as when projecting images in a dark room or onto a small screen. When ECO is selected, the
amount of electricity consumed and the lamp's operating life are changed as follows, and fan rotation noise during projection is reduced. Electrical
consumption: about 20% decrease, lamp life: about 1.2 times longer
Volume You can adjust the Volume. Setting details are saved for each image signal.
Mic Input Level Adjust if the Mic Input level is too low to hear from the projector's speaker, or if the level is too high making the audio crack. When the Mic Input Level is
turned down to 0, no audio is output from the speaker.
Remote Receiver You can limit the reception of the operation signal from the Remote Control.
When you want to prohibit operation by Remote Control, or if the Remote Receiver has a fluorescent light too close to it, you can make settings to
deactivate the remote receiver you do not want to use or that is experiencing interference.
User Button You can select the item assigned from the Configuration Menu with the Remote Control's [User] button. By pressing the [User] button the assigned
menu item selection/adjustment screen is displayed, allowing you to make one-touch settings/adjustments. You can assign one of the following five
items to the [User] button.
Power Consumption, Info, Progressive, Test Pattern, Resolution, Mic Input Level, Pattern
List of Functions
61