Sub Menu Function
Progressive (Component Video can only be adjusted when 480i/576i/1080i signals are being input)
Off: IP conversion is carried out for each field in the screen. This is ideal for viewing images with a large amount of movement.
Video: This is ideal for viewing general video images.
Film/Auto: This is ideal for movie films, CG and animation.
Noise Reduction Smoothes out rough images. There are two modes. Select your favorite setting. It is recommended that this is set to Off when viewing image sources in
which noise is very low, such as for DVDs.
Input Signal You can select an input signal from Computer1/2 input port.
If set to Auto the input signal is set automatically according to the connected equipment.
If colors do not appear correctly when set to Auto, select the appropriate signal according to the connected equipment.
Video Signal You can select the input signal from the Video input port. If set to Auto, video signals are recognized automatically. If interference appears in the image
or a problem occurs such as no image is being projected when set to Auto, select the appropriate signal according to the connected equipment.
Aspect You can set the Aspect Ratio
g
for projected images. s p.35
Reset You can reset all adjustment values on the Signal menu to their default settings, except for Input Signal.
To return all menu items to their default settings, see s p.77
Settings MenuSub Menu Function
Keystone You can correct keystone distortion in the vertical directions. s Quick Start Guide
List of Functions
60