Check Remedy
Is the Mic Input Volume turned down too low? Adjust the Mic Input Volume so that sound can be heard. s Settings Menu - Mic Input Level p.60
Is the Plug-in Power function set correctly in the Configuration
Menu?
When using the condenser microphone, turn On Plug-in Power. s Extended Menu - Plug-in Power p.63
The Remote Control does not work
Check Remedy
Is the Remote Control light-emitting area pointing towards the
Remote receiver on the projector when it is operated?
Point the remote control towards the Remote Receiver.
Operating range s Quick Start Guide
Is the remote control too far from the projector? The operating range for the remote control is about 6 m. s Quick Start Guide
Is direct sunlight or strong light from fluorescent lamps shining onto
the Remote Receiver?
Set the projector up in a location where strong light does not shine onto the Remote Receiver. Or set the remote receiver
to Off from Remote Receiver in the Configuration Menu. s Settings Menu - Remote Receiver p.60
Is the correct setting for the remote receiver selected? Check the Remote Receiver from the Configuration Menu. s Settings Menu - Remote Receiver p.60
Are the batteries dead or have the batteries been inserted correctly? Make sure the batteries are inserted correctly or replace the batteries with new ones if necessary. s p.95
Changing the language for messages and menus
Check Remedy
Change the Language setting. Adjust the "Language" setting from the Configuration Menu. s p.63
Mail is not received even if a problem occurs in the projector (EB-826WH/825H/85H/84H/84L)
Check Remedy
Is the Wireless LAN unit connected?
For Wireless LAN
Check that the optional Wireless LAN unit is securely connected.
Is the network connect setting correct? Check the projector's network settings. s p.65
Is Standby Mode set to Communication On? To use the Mail Notification function when the projector is in standby, set Communication On in Standby Mode from
the Configuration Menu. s Extended Menu - Standby Mode p.63
Problem Solving
89