List of Functions 52
fBasic Menu
Sub Menu Function
Projector name Displays the projector name used to identify the projector when connected to a network.
The default value is "EBxxxxxx" (where xxxxxx are the last six digits of the MAC Address). When editing, you can enter up to 16 single-byte
alphanumeric characters.
PJLink Password Set a password to use when you access the projector using compatible PJLink software. sp.115
You can enter up to 32 single-byte alphanumeric characters.
Web Control
Password
Set a password to use when making settings and controlling the projector using Web control.*You can enter up to 8 single-byte alphanumeric
characters. Web control is a computer function that allows you to set up and control the projector by using the Web browser on a computer
connected on a network. sEasyMP Operation Guide"Changing Settings Using a Web Browser (Web Control)"
Projector Keyword When set to "On", you have to enter the keyword when you try to connect the projector to a computer on a network. As a result, you can prevent
presentations from being interrupted by unscheduled connections from the computer.
Normally this should be set to "ON". sEasyMP Operation Guide"Connecting to a Projector on a Network and Projecting"
Network drive
password
To prevent third parties from overwriting/deleting a file on the SD card without permission, you can set a password. You can enter up to 16 single-
byte alphanumeric characters. sEasyMP Operation Guide"Copying or Deleting SD Card Files over the Network"