7
Part Names and Functions
Front/Top
The illustration shows a standard lens attached.
Name Function
ALamp cover Open this cover when replacing the projector's
lamp. sp.85
BAir exhaust vent Air is used to cool the insides of the projector
and vented through this opening.
Caution
Do not place objects that may become warped
or otherwise affected by heat near the air
exhaust vent and do not put your face or
hands near the air exhaust vent while
projection is in progress.
CFront adjustable
foot
Extend and adjust the position of the projected
image when the projector is placed on a
surface such as a desk. sQuick Start Guide
DFoot adjust lever Pull out the foot lever to extend and retract the
front foot. sQuick Start Guide
EZoom ring Adjusts the image size. sQuick Start Guide
FProjection lens Images are projected through here.
GLens unit removal
button
Press this button to remove the lens unit when
replacing lens units.
HRemote Receiver Receives signals from the remote control.
sQuick Start Guide
IFocus ring
Adjusts the image focus.
s
Quick Start Guide
JAir filter tab When cleaning or replacing the air filter, use
this tab to pull out the air filter. sp.81, p.88
KStatus indicators The color of the indicators and whether they
are flashing or lit indicate the status of the
projector. sp.67