Problem Solving 74
fImage colors are not right
fImages appear dark
Is the computer set for dual display? If dual display is activated in the "Display Properties" of the computer's control panel, only about half of the
image on the computer screen is projected. To display the entire image on the computer screen, turn off the
dual display setting. sComputer video driver documentation
Is the correct resolution selected? Set the computer so that the signals being output are compatible with the projector.
s"List of Supported Monitor Displays" p.116 sComputer documentation
Check Remedy
Do the input signal settings match the signals from the
connected device?
Change the following settings according to the signal for the connected equipment.
When projecting images from equipment connected to Computer1/2 input port or BNC input port
s"Signal" - "Input Signal" p.43
When projecting images from equipment connected to Video1/2 or S-Video s"Signal" - "Video Signal"
p.43
Is the image brightness adjusted correctly? Adjust the "Brightness" setting from the configuration menu. s"Image" - "Brightness" p.41
Are the cables connected correctly? Check that all the cables required for projec tion are securely connected. sQuick Start Gu ide
Is the "contrastg" setting adjusted correctly? Adjust the "Contrast" setting from the configu ration menu. s"Image" - "Contrast" p.41
Is the color adjusted correctly?
Adjust the "Color Adjustment" setting from the configuration menu.
s
"Image"
-
"Color Adjustment"
p.41
Are the color saturation and tint adjusted correctly? Adjust the "Color Saturation" and "Tint" settings from the configuration menu. s"Image" - "Color
Saturation", "Tint" p.41
Check Remedy
Are the image brightness and luminance adjusted correctly? Adjust the "Brightness" and "Brightness Control" settings from the configuration menu.
s"Image" - "Brightness" p.41 s"Settings" - "Brightness Control" p.44
Is the "contrastg" setting adjusted correctly? Adjust the "Contrast" setting from the configu ration menu.
s"Image" - "Contrast" p.41
Is the lamp due for replacement? When the lamp is nearly ready for replacement, the images become darker and the color quality beco mes
poorer. When this happens, replace the lamp with a new lamp. sp.85
Check Remedy
Only when projecting computer images
Only when projecting computer images
Only when projecting images from a video source