Replacing Consumables 85
Replacing the Lamp

fLamp replacement period

It is time to replace the lamp when:
• The message "Replace the lamp. Replace the lamp. "is displayed
when you start projecting.
• The lamp indicator flashes orange.
• The projected image gets darker or starts to deteriorate.

fHow to replace the lamp

The lamp can be replaced even when the projector is suspended from a
ceiling.
A message is displayed.
Flashing orange
Attention
• The lamp replacement message is set to appear after the following
time periods in order to maintain the initial brightness and quality
of the projected images.
s
"Brightness Control" p.44
When used continually at high brightness: About 1900 hours
When used continually at low brightness: About 2900 hours
• If you continue to use the lamp after the replacement period has
passed, the possibility that the lamp may explode increases. When
the lamp replacement message appears, replace the lamp with a
new one as soon as possible, even if it is still working.
• Depending on the characteristics of the lamp and the way it has
been used, the lamp may become darker or stop working before
the lamp warning message appears. You should always have a
spare lamp ready incase it is needed.

Warni ng

When replacing the lamp because it has stopped illuminating, there
is a possibility that the lamp may be broken.
If replacing the lamp of a projector which has been installed on the
ceiling, you should always assume that the lamp is broken, and you
should stand to the side of the lamp cover, not underneath it.
Remove the lamp cover gently.