Connecting the Remote Control with the Lead Wire

If you set up the projector for rear projection and want to use the remote control to control the projector, you need to connect the remote control directly to the projector with the optional lead wire. You might also need to directly connect the remote control if anything is blocking the path between the remote control and the projector.

To directly connect the remote control, connect one end of the lead wire to the projector’s Remote jack. Connect the other end to the output terminal at the front end of the remote control. Make sure both ends are plugged in securely.

 

L R

 

12V

 

 

0.35A

 

 

 

lead wire

Audio In

Audio

DC

 

 

Out

Serial Remote Out

Connecting the Remote Control with the Lead Wire

17

Page 36
Image 36
Epson ELP-3300 owner manual Connecting the Remote Control with the Lead Wire