67Problems with the Projector
For specific problems, see the following:
❙❙
❙❙
❙The power status light does not come on.
Check the power switch and make sure the power cable is securely connected at
both the power outlet and the projector.
The projector has become too hot and has turned off automatically. Wait for the
projector to cool before turning it back on.
The fuse may have blown. Replace the fuse as described in Chapter 5.
❙❙
❙❙
❙The lamp does not come on.
The projector is in standby mode. Press the Standby button on the remote control
or the operation panel.
The lamp is burned out and needs to be replaced.
❙❙
❙❙
❙The temperature status light is flashing orange.
The lamp is too hot. Turn off the lamp and let it cool. When you turn the lamp
back on, check the temperature light again. Make sure nothing is blocking the
ventilation vents.