Installation to Extension Column

1

Screw extension column (sold separately)

to ceiling plate (G). Align the notch with

one of the four holes in the ceiling plate (G) and secure extension column with a M5 x 10 mm socket pin screw (C) using security allen wrench (B). See detail 1.

Screw extension column connector (I) to extension column. Align slot in extension column with one of the top holes in extension column connector (I). Insert and tighten one #10-32 x 3/8" socket pin screw (J) through extension column connector (I) into slot on extension column using security allen wrench (B).

See detail 2.

Screw projector mount (A) into extension column connector (I). Align slot in projector mount (A) to one of the bottom

EXTENSION

COLUMN

(ELPMBC01, UL Listed

EXT or ADJ Series) C (Sold Separately)

G EXTENSION

COLUMN

SLOT

EXTENSION

COLUMN

G K*

DETAIL 1

SLOT

holes in extension column connector (I). Insert and tighten one #10-32 x 3/8" socket pin screw (J) through extension column connector into slot in projector mount (A) using security allen

wrench (B). See detail 3.

I

K

J

I

*NOTE: Slotted set screws (K) are used to jam against the threads of each connecting joint to prevent any excess movement. Do not overtighten screws; overtightening screws will damage threads making it difficult to separate the products.

SLOT

AI

DETAIL 2

EXTENSION

COLUMN

Skip to step 2.

SLOT

KJ

A

DETAIL 3

4 of 10

ISSUED: 01-23-07 SHEET #:055-9498-1

Visit the Peerless Web Site at www.peerlessmounts.com

For Technical Support Contact Peerless Mounts at 1-800-729-0307 or 708-865-8870.