Projector Alignment
5 | To adjust roll, pitch and yaw loosen the set screw (shown |
below) using allen wrench (B). You should be able to just |
slightly loosen the screw so that your adjustments can be set without having to hold the projector. Move projector to desired position and slowly tighten set screw.
IMPORTANT: Allen wrench is your key for projector removal. Store it in a safe place.
PROJECTOR
SET
SCREW
Accessories
NOTE: All accessories are available for purchase through Epson (www.epson.com)
ELPMBP01 | ELPMBP02 |
Adjustable Suspended Ceiling Channel Kit | False Ceiling Plate Kit |
•Mounts above 2' x 2' or 2' x 4' ceiling tile to structural ceiling with tie wires
•Includes tie wire supports and flush mount tube
• 1 ½" - 11.5" NPT fitting for attachment of adjustable extension column
• Two knockout panels for electrical outlet boxes
•13.9" continuous, uninterrupted projector adjustment
•Escutcheon ring included for a clean finish
•Max weight load: 60 lb (27 kg.)
•Color: White
| • | Replaces a 2' x 2' ceiling tile and mounts to |
|
|
| structural ceiling with tie wires |
|
| • |
| |
|
| points for mount attachment |
|
| • | Includes tie wire supports and flush mount |
|
|
| tube |
|
| • | 1 ½" - 11.5" NPT fitting for attachment of | R |
|
| adjustable extension column |
|
| • | Two knockout panels for electrical outlet boxes |
|
R | • | Max weight load: 50 lb (23 kg.) |
|
| • | Color: White |
|
ELPMBP03
Structural Round Ceiling Plate
•Mounts to wood joist or structural concrete ceiling
•Features cable management access hole
•1 ½" - 11.5" NPT fitting for attachment of adjustable extension column
•Max weight load: 150 lb (68 kg.)
•Color: White
R
ELPMBC01
Adjustable Extension Column (Pipe) 8" - 11"
•8" - 11" adjustable extension in 1" increments
•Specially designed to allow internal cable management
•1 ½" - 11.5" NPT pipe threaded on both ends
•Notched ends for use with set screw to provide safety and security
•Color: White
R
9 of 10 | ISSUED: |
Visit the Peerless Web Site at www.peerlessmounts.com | For Technical Support Contact Peerless Mounts at |