26 - Connecting the projector to a computer

Condition #2: The resolution and frequency of the computer must be within the

boundaries listed in the chart on the next page.

Projection will not be possible if the computer does not support the output image signal
resolutions and frequencies shown in the chart on the next page (there are cases where
projection is possible, but vivid projection will not be possible).
Confirm the image signal resolution and frequency with the computer’s instruction
manual.
There are also computers available that allow the output resolution to be amended. In this
case, amend the parameters to fit within the ranges shown in the chart on the next page.
*1 The EMP-505 is not compatible with UXGA.
Signal Refresh Rate
(Hz)
Resolution
(Dots)
Pixels (dots)
Used During
Resizing Dis-
play (Resize
On)
Pixels (dots)
Used During
Real Display
(Resize Off)
Remarks
VGAEGA 640× 350 1024×560 640×350
VGA 60 640× 480 1024×768 640× 480
VGA Text 720× 350 1024× 640 720× 350
720× 400 1024× 640 720× 400
VESA 72/75/85 640×480 1024×768 640×480
SVGA 56/60/72/75/
85
800×600 1024×768 800×600
XGA 43i/60/70/75/
85
1024×768 1024×768 1024× 768
SXGA 70/75/85 1152×864 1024×768 1152× 864 Virtual (Partial) Display
SXGA 60/75/85 1280× 960 1024×768 1280×960 Virtual (Partial) Display
SXGA 43i/60/75/85 1280×1024 960×768 1280×1024 Virtual (Partial) Display
UXGA*1 60 1600×1200 1024×768 1600×1200 Virtual (Partial) Display
MAC13 640× 480 1024×768 640×480
MAC16 832×624 1024×768 832×624
MAC19 1024×768 1024×768 1024×768
MAC21 1152×870 1016×768 1152 ×870 Virtual (Partial) Display
NTSC 1024×768 1024×576 4:3 ↔ 16:9, Selectable
PAL 1024×768 1024×576 4:3 ↔ 16:9, Selectable
SECAM 1024×768 1024×576 4:3 ↔ 16:9, Selectable
SDTY
(480i/P)
60 1024×768 1024×576 4:3 ↔ 16:9, Selectable
HDTV
(720P)16:9
1024×576
HDTV
(1080i)16:9