When the Indicators Provide No Help - 99

■
■■
■When the Indicators Provide No Help
Refer to each relevant item if the following situations arise but the indicators provide no help.
·The image is not projected page99
·No sound page106
·The image is unclear page103
·The remote control will not wor k page 106
·The image is cut up (Large)/Small page104
·Cannot end page107
·The image color is bad page105
·The image is dark page105

The image is not projected

● Nothing is displayed

Nothing is displayed
●Is the Lens Cover still in place?
see page35
●Has the power been switched off and then on immediately?
The [Power] button will not operate after projection has been
finished (during the cooling down procedure). The [Power] button
will work again after the cooling down process Projection lamp
(cooling operations: the operation indicator is illuminated in orange)
has been completed.
see page45
●Is the Sleep Mode set at ON?
When the sleep mode has been set at [ON], the lamp will be
automatically extinguished if no operations occur and no signals are
input for a period of thirty minutes.
see page67
●Did you press the [Power] button?
see page37
●Has the brightness of the image been correctly adjusted?
see page65
●Is the system in the [A/V Mute] mode?
see page51
Perform the reset procedure.
see page68
●Are image signals being input?
No message will be displayed if the [Menu] - [Settings] - [No Signal
Display] parameter is set at OFF. Set this to black or blue to display
the message.
Refer to the relevant items when the message is displayed.
see page100
●Are image signals being input?
No message will be displayed when the [Menu] - [Settings] and [No
Signal Display] parameter is set at [OFF]. Set either black or blue to
display the message. Refer to each relevant item when the message
is displayed.
●Perform the reset procedure.
see page68