Connecting up computer with USB cables - 95
3
Select the added drive.
All subsequent operations are the same as Windows file operations.
Point
·You cannot connect to Macintosh. Do not transfer or connent to Macintosh, as it might
cause a data crush.
·Projector memory card operations from a connected computer are only possible when the
projector display is displayed as a file list.
·Operations are not possible when the projector's memory card is being accessed.
Pay attention to the following when a USB connection has been established.
·Do no remove the memory card or unplug the USB cable when the access lamp is blink-
ing. Failure to observe this may result in damage to the memory card or malfunctions on
the computer.
·Confirm that the access lamp has been extinguished before selecting [Yes] (or [No] to
return the system to the original status) when the Abort USB Access message is dis-
played. Failure to observe this may result in damage to the memory card or malfunctions
on the computer.
·Do not perform access from the computer after the Abort USB Access message has been
displayed. Access will be possible after the screen has returned to the file selection
screen.
·Select [Disconnect Removable Devices] when removing memory cards on the Windows
2000/Me platforms.
·The image capture function cannot be used during USG connections.