Operating scenarios - 83

Point
·The playback conditions must be set at the time of creation, but the playback sequence
and display/non-display parameters can be amended with the [Edit Scenario] button. (see
page83)
·A confirmation message will be displayed when the [Easy/MP] button is pressed during
scenario playback. Press the [Enter] button one more time to end playback.
Editing scenarios
1
Align the cursor with the required scenario file on the file list display, and then press
the [Esc] button.
The file will remain selected and the menu on the left-hand side will be enabled for use.
2
Align the cursor with [Edit Scenario], and then press the [Enter] button.
A preview of the files contained within the scenario will be shown.
Point
Select [Options] to amend the repeat setting. (see page81)
Select
Selected file