86 - Creating scenarios

Creating scenarios
Scenarios are created with the special [EasyMP software] software.

Install the EasyMP Software

Operating environment

Check to ascertain that this software can be operated on the computer in use.

Installation

Windows 98 screens are used here for explanatory purposes, but the procedures are the same
with Windows 95.
1
Start up Windows and set the EasyMP Software CD-ROM in place.
The set-up program will automatically start.
Point
If the setup program will not start, open the [Specify and execute files] dialog box with
[Start] - [Specify and execute files], and then execute [CD-ROM Drive name: \SETUP].
2
Select the language and then click on the [OK] button.
The installation procedures will commence. Follow the instructions on all subsequent
screens to proceed with the process.
Point
Select [EMP SlideMaker] with [Settings] - [Control Panel] - [Add and Delete Applications],
and then execute [Add and Delete] to uninstall the program.
Computer Computers that operate on Windows 95/98/NT4.0/2000/Me platforms
CPU Pentium 166MHz or higher (Pentium II 300MHz is recommended)
Memory capacity 32 Mbyte or more (96MB or more is recommended)
Required hard disk space 12 MB or more
Display Resolution of VGA (640 x 480) or higher