Connecting the projector to a computer - 27

In the case of the mini D-Sub 15 pin
·Connect the computer's monitor port to the projector's Computer/Component Video port
with the computer cable supplied.

When the monitor port is the D-Sub 15 pin

Point
·Set the input signal parameter on the image menu to [RGB] once the connection has
been established.
·Do not bunch the power cable and the computer cable together. Failure to observe this
may result in noise appearing in the images, and may cause malfunctions.
·An adapter may be required when making the connection depending on the stand of the
computers port. Refer to the computer instruction manual for further details.
·An optional MAC desktop adapter (ELPAP01) is required when connecting up to a Macin-
tosh computer.
Caution
·Switch off the power supply to the projector and computer before attempting to make the
connection. Failure to observe this may result in damage.
·Confirm the shape of the cable connector and the shape of the port before making the con-
nection. Applying excessive force when the direction or shape of the connector and port
differ may result in defects and damage to the equipment.
Audio
Audio
R
L
InOut
S-Video
Video
Computer/
Component Video
Computer/Component Video port
Computer Cable
(supplied with the projector)
Monitor port
(video port)