Epson EPIX manual Maintenance Procedures, Cleaning the System, Cleaning the Scanner

SECTION 7: MAINTENANCE PROCEDURES

The EPIX Digital Imaging System is designed for many years of trouble-free operation. It is manufactured from the highest quality components to ensure excellent performance. Maintenance that can be performed by the operator is minimal.

7.1. CLEANING THE SYSTEM

Cleaning the Scanner	them and keep them dust- free. Use the
Turn off the EPIX SCANNER, as described in	following procedure to clean them:
	1. Use lint- free, 100% cotton gauze (not
Section 5.5, before cleaning. Wipe the outside
surfaces with a paper towel dampened with a	cotton balls). Gently wipe the cotton gauze
cold sterilant solution or household, non-	over the dry imaging plate surface. Wipe
abrasive cleaner (window cleaner works well).	back and forth and then in a circular
DO NOT SPRAY OR SOAK THE	motion.
SCANNER. Wipe the inside of the carousel	2. To clean any remaining stains, dampen the
well with a very slightly damp cloth. Be
	gauze in anhydrous isopropyl alcohol and
careful not to allow running or dripping
	wipe using the same motion as above.
solvents into the EPIX SCANNER. This could
	3. Completely dry the surface by wiping with
cause damage to the electronics inside. Allow
to air dry before plugging in or turning back	another piece of cotton gauze. Ensure that
on.	the imaging plate is completely dry before
Cleaning Imaging Plates	use.
Imaging plates should be handled carefully.
For the best images, take care not to scratch

Cleaning the carousel:

Fig. 7-1

Spray the soiled surfaces of the imaging plate holder and carousel with a general household non-abrasive cleaner or soap and water. Do not use strong alkaline or ammonia based cleaners. Wipe clean and allow to air dry.

Logos Imaging EPIX Scanner	18
User Manual