Epson ES-300C, ES-600C, ES-800C To Add a Target Device, 1.Select a predefined target device similar to the device you want to define

Select Target Device from the Edit pull down menu. You see the Target Device screen:

larget Device	Target Device Setting Name
	1	taraet device 3
p&Y	Gamma Correction
		Analog Monitor
		Cglor Correction
		CRT D isplay
	Resolution
		72 DPI

To Add a Target Device

Rather than modifying the Epson-supplied target devices, you will probably want to create your own definitions. Follow these steps to add a target device:

1.Select a predefined target device similar to the device you want to define.

2.Type the name you want to assign to your target device over the name displayed in the Target Device Setting Name dialog box.

3.Select the values you want to assign to the target device, using the information in the following table. These options are described in more detail in your scanner manual.

Using TWAIN 3-15