2-3 Names and Functions

9)Power supply terminal block (display unit) Supplies the power to the display unit (24 V DC).

10)Modular jack 1 (MJ1)

Used for screen data transfer and connection with PLCs or other peripheral devices.

11) Modular jack 2 (MJ2)

Used for connection with PLCs or other peripheral devices.

12) PLC communication connector (CN1)

Used for connection with a controller (PLC, temperature controller, inverter, etc.).

13)100BASE-TX/10BASE-T connector (LAN) Used for Ethernet connection.

14)USB-B (slave port)

Used for screen data transfer or connection with a PictBridge-compatible printer.

15) USB-A (master port)

This is the connector where a printer or a CF card reader/writer is connected.

16) USB cable clamp mounting hole

For NP5M0101-5H4/4H4, NP5N0011-5H4/4H4, this hole is used for attaching a USB cable clamp. For NP5M0101-3H4/NP5N0011-3H4, this hole is used for attaching a USB cable binder.

17) Mounting holes

Used for inserting fixtures when securing the @E.Terminal to the mounting panel.

2-13