2-6 Dip Switches

In NP5M0101-5H4/4H4, NP5N0011-5H4/4H4, the dip switch is hidden by the controller unit. Operate the dip switch by detaching the controller unit.

The @E.Terminal is equipped with eight (1 to 8) dip switches. When setting the dip switch, turn the power off. Upon delivery, all the dip switches are set to OFF.

• For NP5M0101-5H4/4H4

• For NP5M0101-3H4

 

NP5N0011-5H4/4H4

NP5N0011-3H4

 

Rear view

Rear view

 

 

 

CF

CN7

CN7

CN5

 

 

 

CN5

 

 

CF

 

 

24VDC

 

 

FG

 

 

CN1LAN

U-B U-A

MJ1 MJ2CN1LANU-B U-A

MJ1

MJ2

Dip switch

ON

1 2 3 4 5 6 7 8

CF auto-uploading

Not used

CF card interface cover access control

MJ2 (modular jack 2) terminating resistor CN1 +RD/-RD terminating resistor at pins 1 and 2

MJ1 (modular jack 1) terminating resistor

CN1 +SD/-SD terminating resistor at pins 3 and 4

Dip switch number 1 (Note: ) (CF Auto-uploading)

Set the dip switch number 1 to the ON position when auto-uploading a screen data file saved on a CF card.

Procedure

1.Have a CF card

Have a CF card to which the screen data is loaded using the V-SFT-5 editor. (For the loading procedure, refer to the “V8 series Reference Manual.” )

2.Insert a CF card

Turn the power of the display unit off, and set the dip switch number 1 to the ON position. Open the CF card interface cover, and insert a CF card.

3.Auto-uploading starts

Turn the power of the display unit on. The screen data is automatically loaded into the FLASH memory of the unit. Note: Be sure to set the dip switch number 1 to the OFF position if you do not use CF auto-uploading function.

2-18