Epson M147C, M147B manual Serial

Labels / Etiketten / Etiketten / Étiquettes / Etiquetas / Etiquetas / Etichette

DIP Switch Tables

Serial

SW	Function	ON	OFF
1-1	Data receive error	Ignored	Prints “?”
1-2	Receive buffer	45 bytes	4 KB
	capacity
1-3	Handshaking	XON/XOFF	DTR/DSR
1-4	Data word length	7 bits	8 bits
1-5	Parity check	Enabled	Disabled
1-6	Parity selection	Even	Odd
1-7	Transmission speed (See table below.)
1-8
2-1	Handshaking	Receive	Offline or Receive
	(BUSY condition)	buffer full	buffer full
2-2	Customer display	Connected	Not connected
	connection
2-3	Print density	See Table A.
2-4
2-5	Internal use. Fixed to Off.
2-6
2-7	I/F pin 6 reset	Enabled	Disabled
2-8	I/F pin 25 reset	Enabled	Disabled
Transmission speed (bps)-bits per second				1-7	1-8
4800				ON	ON
9600				OFF	ON
19200				ON	OFF
38400				OFF	OFF

Parallel

SW	Function	ON	OFF
1-1	Auto line feed	Always	Always disabled
		enabled
1-2	Receive buffer	45 bytes	4 KB
	capacity
1-3~	Reserved. Fixed to Off.
1-8
2-1	Handshaking	Receive	Offline or Receive
	(BUSY condition)	buffer full	buffer full
2-2	Internal use. Do not change setting. Fixed to Off.
2-3	Print density	See Table A.
2-4
2-5	Internal use. Fixed to Off.
2-6
2-7	Reserved (for serial interface) Fixed to Off.
2-8	I/F pin 31 reset signal. Do not change setting.
	Fixed to On.

Table A

Print density/low power		SW 2-3	SW 2-4
1	Print density (Light)	ON	ON
2		OFF	OFF
3		ON	OFF
4	Print density (Dark)	OFF	ON