Epson M X - 8 5 off, 8 bit, 7 bit, SW A2, SW A3, SW A4, Pin No, Function, CCITT #2, WU/TELEX, CODE TABLE, CCllT #2 AMERICAN, Table 3 Baud Rate Selection

4.Now using Table 2, select your transmission code: ASCII or Baudot.

A. If ASCII is selected, refer to Table 4 for word length setting and parity control. B. If Baudot is selected, refer to Table 5 for selection of correct Baudot code.

5.Set Line Spacing to desired position.

6.Set Auto Feed if required. This is necessary if the host system does not transmit line feed control code.

Details of the coding structures are contained in Appendix A for ASCII and Appendix B for Baudot.

Table 3 Baud Rate Selection

				Note: 1 = ON
	Table 4 ASCII Code Table Selection
Pin No.	Function	off	On	Factory-set
A2	Data Length	8 bit	7 bit	ON
A3	Parity Check	Enable	Disable	ON
A4	Parity	Even	Odd	ON

Table 5 BAUDOT Code Table Selection

SW A2	SW A3	SW A4	CODE TABLE
ON	ON	ON	CCITT #2
OFF	OFF	ON	CCllT #2 AMERICAN
ON	OFF	ON	WU/TELEX

- 1 1 -