4.2. Paper empty

The paper empty switch located beneath the platen will activate when the paper runs out. When activated, the following conditions will take place:

Status - DTR pin 20 = Mark (-V)

Rev Chan pin 11 = Mark (-V) Data Entry - Available until buffer full Indicators - “Paper Out” ON

"Ready” OFF

Buzzer - Sounds for 20 seconds Printing - Disabled

N O T E :

Buzzer will stop upon depression of LF or FF button.

Both the paper empty and the low paper conditions call for replacement of the paper roll. This should be done with the power on to avoid losing any data. Upon completion of paper loading, the “On-Line” button should be depressed. This will activate printing if there are any printable characters stored in the memory. The “Paper-Out” indicator w&be extinguished and the “Ready” indicator illuminated if the MX-85 is not in a memory full condition.

4.3. 4K memory full

When the buffer memory reaches 3,996 bytes, the following conditions will take place:

Status - DTR pin 20 = Mark (-V)

Rev Chan pin 11 = Mark (-V)

Data Entry - Disabled

Indicators - “Ready” OFF

Printing - Enabled

As soon as 1 K bytes of memory is made available, all of the above conditions will revert to normal.

- 2 3 -