Epson MLC 104 IP Plus setup guide Setting up e-mail notifications, Adding e-mail contacts

Software Setup, cont’d

4.Complete each of the fields with your mail server

IP address, mail server domain, and, if necessary, your user name and password.

5.Click the OK button.

6.Go back to the Settings menu to complete the entries for your subnet mask and gateway settings.

Setting up e-mail notifications

The Email Manager provides preset messages for some of the most common actions performed in GC.

To set up an e-mail notification for a specified action, do the following:

1. From the Global Configurator Edit menu, choose Email Manager. The Email Manager dialog box appears, as shown below.

2. Select one of the choices under the Name field.

This action automatically populates the Name, Subject, and Body fields for the action, but these fields can be altered, if needed.

To create a custom notification e-mail message, do the following:

1.Fill in name, subject, and body sections in the Email Manager dialog box.

2.Click the Add button. The custom message joins the list of preset messages.

3.Click the Done button to close the dialog box.

Adding e-mail contacts

To add e-mail contacts, do the following:

1.	From the Edit menu, choose Contact Manager. A dialog
	box appears.
2.	Fill in the name, e-mail address, and the company areas of
	the Contact Manager dialog box.

Email Manager dialog box	Contact Manager dialog box
	3.	Click Add to add the newly-created contact to the list.
	4.	Click OK to close the dialog box.

3-8 MLC 104 IP Plus • Software Setup MLC 104 IP Plus • Software Setup 3-9