Epson MLC 104 IP Plus setup guide Software Setup, cont’d, Control module main window

Software Setup, cont’d

Control module main window

4. Select the Address #1 tab. The Address 1 IRCM-DV+ [DVD] window appears.

5.In the upper left corner drop-down menu (under

DVD & VCR Control), select Input 2, as illustrated below. This assigns the input button (Input 2) to activate the IRCM-DV+ [DVD] control panel.

Input 2 button selection

6. Click the Auto Fill button.

NYou must have added an applicable IR driver to use Auto Fill.

A dialog box appears.

Control module configuration

7.	From the Auto Fill Dual-Function DVD and VCR IR
	Control Module dialog box, select the Hitachi DV-PF7E
	DVD/VCR IR driver. All functions for the selected driver
	appear in the right side pane of the dialog box.
8.	Select Port A from the bottom portion of the dialog box.
9.	Click the OK button. The dialog box closes.
	All commands that match a button on the module are
	assigned to that button. Red triangles on the buttons of the
	control module indicate that all the matching buttons have
	been auto-filled.
10.	To configure Address 2 IRCM-DV+[VCR], repeat steps 1
	through 9, substituting Address 2 for Address 1.

NIn step 5, you will need to select a different input button in the VCR half of the control module.

NIf using an IRCM-DV+, you must associate each half with an input.

3-16 MLC 104 IP Plus • Software Setup MLC 104 IP Plus • Software Setup 3-17