Epson setup guide Table of Contents, Chapter Two MLC 104 IP Plus Hardware Setup

Table of Contents

Chapter One • Introduction	1-1
About this Manual	1-2
About the MLC 104 IP Plus Medialink™Controllers	1-2
About Global Configurator	1-3
System Requirements	1-4
Installing the Software	1-5
Updating Firmware	1-5
Chapter Two • MLC 104 IP Plus Hardware Setup	2-1
Right Side Panel Features and Connections	2-2
Left Side/Top Panel Features and Connections	2-8
Front Panel Features and Basic Operation	2-10
Buttons	2-10
Volume control	2-11
Configuration (host control) port	2-11
Chapter Three • MLC 104 IP Plus Software Setup....	3-1
Step 1: Download Device Drivers	3-3
Step 2: Create a New Project	3-4
Step 3: Add an MLC 104 IP Plus Controller and Define
its Location	3-5
Step 4: Define E-mail Settings	3-7
Defining e-mail server settings	3-7
Setting up e-mail notifications	3-8
Adding e-mail contacts	3-9
Step 5: Add a Serial and an IR Device	3-10
Downloading additional drivers	3-10
Adding a serial driver	3-11
Adding an IR driver	3-12
Step 6: Configure the Front Panel Buttons	3-13
Configuring an input button	3-14
Configuring the On and Off buttons	3-14
Step 7: Configure the Control Modules Using the
Auto Fill Feature	3-15
Step 8: Create a Display Shutdown Schedule	3-18
Step 9: Create a Display Lamp Hour Warning E-mail 3-20
Step 10: Create a Display Disconnection E-mail	3-22

MLC 104 IP Plus • Table of Contents