Chapter 1

With the printer facing you, as shown in Figure 1-2, grasp the lid on its left top side and pull straight up. Very easy. To replace the lid, just reverse the

procedure.

Figure 1-2

Locate the 2 shipping screws, shown in Figure l-3. These screws are used to protect the MX-70 from damage during shipping.

Shipping Screws

Turn the printer over and lay it on a soft surface. Using a Phillips type screw- driver, remove the shipping screws and save them in case you decide later to lend the printer to Aunt Bernice in Ohio. These screws are in place during shipping to protect the printer from damage and are located as shown in Figure l-3.

Shipping Screws

Figure 1-3

Turn the printer back over when you are ready for the next step.

2