Error message

Description

 

 

 

 

 

 

 

Some errors occurred

Some files were skipped. The

while deleting files. The

memory card may be

operation was canceled.

write-protected. Check the

 

 

 

 

 

 

memory card and try again.

 

 

 

 

 

 

 

There is no response from

Make sure the USB cable is

the printer.

connected correctly. Check your

 

 

 

 

 

 

printer.

 

 

 

 

 

 

 

You must set the date and

Set the correct date and time.

time to ensure correct

(See page 51.)

operation.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Wait until the P-4000 cools

 

 

 

 

 

 

down.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The battery power is running

 

 

 

 

 

 

out. Charge the battery. See

 

 

 

 

 

 

“Charging the Battery” on

 

 

 

 

 

 

 

 

 

 

 

 

page 10 for details.

 

 

 

 

 

 

 

 

 

 

 

 

 

Press the Reset button. See

 

 

 

 

 

 

“Resetting the P-4000” on

 

 

 

 

 

 

 

 

 

 

 

 

page 57 for instructions.

 

 

 

 

 

 

 

 

 

 

 

 

 

Problems and Solutions

Use the information in this section to diagnose problems and find solutions.

Power Problems

The power does not turn on.

Cause

What to do

 

 

 

 

 

 

The battery has run out.

When the

 

 

icon appears on

 

 

 

 

the top right corner of the LCD,

 

the battery has run out. See

 

“Charging the Battery” on page 10

 

and charge the battery.

 

 

 

 

 

The battery is not installed

Make sure the battery is installed

correctly.

correctly. See “Installing the

 

Battery” on page 9.

 

 

 

 

 

The P-4000 may have shut

Slide the power switch down to

off automatically to save

turn the P-4000 back on.

battery power.

 

 

 

 

 

 

 

 

 

Maintenance and Troubleshooting 54