About the AC Adapter

The P-4000 comes with an AC adapter. Use the adapter to charge the battery and when the P-4000 is connected to a computer or printer. You might also want to use it whenever possible to view videos or photos, so you can save battery power.

Warning:

Use only the AC adapter provided, which is designed for the P-4000. Using another adapter could cause fire, electrical shock, or injury.

Do not use the AC power cord or the adapter for any purpose other than powering the P-4000.

To prevent fire or electric shock, do not cover the AC adapter with a blanket or similar covering.

Do not connect the AC adapter when the battery is not installed; this can damage the P-4000.

Do not remove the AC adapter from this device during operations. You can, however, connect the adapter during operations.

Installing the Battery

The P-4000 comes with a Lithium-ion battery. Follow these steps to install it:

1Turn the P-4000 upside down and slide the battery cover to the left to open it.

2Insert the battery into the compartment as shown. Make sure the gold contacts on the battery go in first.

Getting Started 9