If the liquid crystal solution contained in the LCD panel on this product leaks out and gets onto your hands, wash them thoroughly with soap and water. If it gets into your eyes, flush them immediately with water. If discomfort or vision problems remain after a thorough flushing, see a doctor immediately.

Use only a soft, dry cloth to clean the display. Do not use liquid or chemical cleaners.

Using a Memory Card

Only memory cards designed for the product’s specifications can be used. (See “Inserting and Removing Memory Cards” on page 16.)

The methods for using memory cards vary according to card type. See the documentation included with your memory card for details.

Do not remove a memory card or turn off the product while the Access light is flashing.

Storing, Maintaining, or Transporting the P-4000

Do not store this product outdoors.

Do not store this product near water.

Do not store this product in a location subject to high temperature or humidity.

Do not store this product in a location subject to rapid changes in temperature or humidity.

Do not store this product in a location subject to direct sunlight or strong light sources.

Unplug this product from the power outlet before cleaning it. Use a damp cloth for cleaning and do not use liquid or aerosol cleaners.

Remove the battery and unplug this product and refer servicing to qualified service personnel under the following conditions: The power cord or plug is damaged; liquid has entered this product or its options; this product or its options have been dropped or the case is damaged; this product or its options do not operate normally or exhibit a distinct change in performance.

WARNING: The cords included with this product contain chemicals, including lead, known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling.

(provided in accordance with Proposition 65 in Cal. Health & Safety Code § 25249.5 et seq)

Notices 63