Taking Pictures 2-13

R4C3700
Rev.D
A5 size CHAP2.FM
4/21/99 Pass 0
R
Proof Sign-off:
Ohtera _______
Fujimori _______
Pipa _______
2
You can set the self timer along with the continuous
shooting mode to create a ten second delay between
the time you press the shutter button and the moment
the actual image is captured. For instructions, see
“Using the self timer” on page 2-10.
Taking the 2nd picture quickly
After taking a picture, the PhotoPC 750Z takes few
seconds to process and save the image in the camera’s
memory. During this time you cannot take a photo,
which means that you must wait a few seconds before
taking a second photo. The quick shooting mode
allows you to take pictures without a delay by saving
all the images later at once. Follow the steps below.
Note:
When the camera is in the quick sho otin g mode, HyPict
image quality is disabled.
1. Follow steps 1 to 6 as described in “Using the
continuous shooting feature” on page 2-12,
selecting Quick in plac e of Cont in step 5. An
arrow mark appears beside Cnt on the camera’s
display panel.
2. To take pictures, hold down the Function button
on the left of the LCD monitor and press the
shutter button. Do not release the Function
button until you finish taking pictures in
succession.
Note:
To use the viewfinder when takin g pictures in the quick
shooting mode, turn the camera’s dial switch to On.
3. Release the Function button. The icon appears
on the LCD monitor and the camera process and
saves all of the captured images.
4. To exit quick shooting mode, follow steps 2 to 4
on page 2-12, then select Off and press the SEL
button. Then press the ESC button twice.