4-10 Using Direct Print to Print Photos
LProof Sign-off:
Ohtera _______
Fujimori _______
Pipa _______

R4C3700

Rev.D
A5 size CHAP4.FM
4/21/99 Pass 0
LCD Monitor and Display Panel Messages
When printing with the Direct Print program, a
variety of status messages may appear on the camera's
LCD monitor and display panel. For detailed
explanations of these messages, see the following
tables.
LCD monitor messages
Message Explanation
Check Printer
Model.
Print: SEL
Cancel: ESC
The camera is not connecte d
to an appropriate printer.
Connect the camera to a
printer described in page 4-2,
then press the SEL button to
begin printing. (To can ce l
printing, press the ESC button.)
Battery is low.
Use AC adapter. Battery power is almost out.
Connect the camera to the
optional AC adapter.
Check Printer
Connection or
Printer Error.
Printing stopped because of a
printer error. Clear the error,
then start printing again from
the beginning. (For
information on clearing printer
errors, refer to your printer
User's Guide.)
Printing
Canceled This message appears when
you hold down the ESC button
for more than three seconds
while printing. The printer stops
printing and ejects the paper.
The main menu will be
displayed automatically after
three seconds.
No photos in
memory This message appears when
there are no photos in your
camera’s memory. Press the
SEL button to return to the
main menu.
Print setting is
returned to
default.
This message appears when
an error occurs while the
Direct Print program is
working. The setting you have
made is returned to the
default value. Press the SEL
button to go back to the main
menu, and make your print
settings again.