28
Selecting the Input Source
Selecting the Input Source
When a device is connected, projection commences automatically without
having to select the input source, however when connected to two or more
devices, you need to switch between the input sources.
Projector
The input source changes each time [Source] is pressed.
The items selected using the “Input signal” command in the “Image” menu are
displayed. See “Image menu” on page 36.
Remote control
The input source switches between Computer and Component video
whenever the [Computer] button is pressed, as shown above.
The input source switches between S-Video and Video whenever the
[S-Video/Video] button is pressed, as shown above.
Computer/
Component video
S-Video
Video
pIf two or more sources are connected, be sure to swap the audio cables
between the connected equipment, when necessary.
Computer
Component Video
Component Video
S-Video
Video