8
Part Names and Functions
Rear•Computer/Component Video port
s P. 14, P. 20
Inputs analog video signals from a
computer and Component Videog
signals from other video sources.
•Monitor Out port s P. 16
Outputs the projected analog
computer signal to an external
monitor. This feature is not available
for video signals.
•remote control infrared receiver
s P. 11
Receives signals from the remote
control.
•power inlet s P.22
Connects the power cable.
•Video port s P. 20
Inputs Composite Videog signals to
the projector.
Connect using an A/V cable.
•S-Video port s P. 20
Inputs S-Videog signals to the
projector.
Connect using an S-Video cable.
•security lock s P.62
•Audio port s P. 15, P. 21
Inputs audio signals to the projector.
Connect using an A/V cable, or a stereo
RCA cable.
When using computer and video
equipment alternately, swap the cable or
use an audio switch.
•Control (RS-232C) port s P.63
Connects the projector to a computer using an
RS-232C cable. This port is for control use and
should not be used by the customer.
•remote control holder s P. 11
Store the remote control in here when
not in use.