56
Projector Care
Replacing consumables
Changing the battery (Remote Control, Presentation Remote
Control)
Replacement battery: 1 × CR2025 lithium battery
1Remove the battery holder.
While pressing the catch of the battery holder inwards, pull the battery
holder out.
2Remove the old battery and insert the new one.
Check the position of the (+) mark inside the battery holder to ensure
that the battery is inserted the correct way.
3Replace the battery holder.
Press the battery holder in until it clicks.
Lamp replacement period
◗It is time to change the lamp when the “Replace Lamp” message
appears in the bottom left hand corner of the screen at the
commencement of projection and remains for 30 seconds.
◗It is also time to change the lamp when the Warning indicator flashes
red at 0.5 second intervals.
cKeep batteries away from children to avoid the risk of accidents.
If a child swallows the battery, contact your doctor immediately. pPlease dispose of used batteries in accordance with local waste
disposal regulations.
p• The replacement message will appear after about 1900 hours of use.
• When this message is displayed, please replace the lamp as quickly as
possible.
• The lamp may explode if you continue to use it beyond the lamp
replacement period.
• Some lamps may stop operating before the replacement message is
displayed. It is recommended that you have a replacement lamp ready in
case this happens.
• Replacement lamps can be purchased at your nearest dealer.