6.Open the File menu and select Print.
7.Select CD/DVD as the Media Type setting.
8.Select Print Position Check Pattern.
9.Click Print, then click OK on the next screen.
The confirmation pattern is printed on
the check disk or CD and the printer ejects it.
10.Remove the check disk or CD and measure the distance from the edge of the hole to the small cross marks labeled Top and Right. You’ll need a metric ruler with millimeters for accurate measurements.
11.Open the File menu and select Adjust Print Position. You see a screen like this:
12.Make sure Value entry is checked.
13.Select the Top distance as the Top Space setting and the Right distance as the Right Space setting.
14.Click OK to save the measurements.
44Printing From Start to Finish