PriotityFax 1000 M anual
Receiving
Documents
AUTO ANS
ON OFF
Automatic Reception
AUTO ANS
ON OFF
RING DELAY
Manual Reception
AUTO ANS
ON OFF
START/COPY
Continue performing Step 3 as often as necessary until the entire document has been sent.
If the last page in one group has been drawn completely through, you can still put additional pages in the machine without redialing if you do so before the beep sounds.
The PriorityFax can receive documents either automatically or manually; you make the choice with the AUTO ANS switch on the back control panel. If Automatic Answering is on, fax reception is automatic; if it is off, fax reception is manual.
Automatic answering is recommended unless you have only one line for both faxing and telephoning.
If Automatic Answering is on, do not answer your telephone when it rings. After one ring the fax machine begins fax reception. If you wish, you can use the RING DELAY switch on the back control panel to have the fax machine wait four rings before beginning fax reception.
The document you are receiving
Do not touch the received document until it is completely out of the front paper slot. Pulling on a document that is still coming out of the fax machine can decrease the image quality.
If Automatic Answering is off, lift the handset and speak to the other party when the phone rings.
If the other party is telephoning you and not trying to send a fax, simply use the PriorityFax as an ordinary telephone, but if the other party wants to send you a fax, press START and hang up.
The document you are receiving begins appearing from the paper slot at the front of the machine. The automatic cutter cuts off each page as it is received, and the machine beeps once when the transmission is complete.