Adjusting the

Handset Volume and

Ringer Switches

VOLUME

Using Standard

Dialing

Using Redialing

Using th e PriorityFax as a Teleph one

The handset of the PriorityFax is used like the handset of any other telephone. To adjust the listening volume of the handset, follow these steps:

Locate the volume adjustment switch in the bottom left comer on the underside of the handset.

Move the switch left for normal volume or right for high volume.

To adjust the loudness of the ring:

Locate the ringer switch on the right side of the telephone cradle.

Move the stitch toward the back of the fax machine for a loud tone, to the middle for a quiet tone, and toward the front to turn off the ring.

To dial a telephone call, simply pick up the handset and wait for a dial tone before dialing the number you wish to reach

When you receive a busy signal, you can save time by pressing just two buttons to try the number again. Follow these steps:

Lift the handset, wait for a dial tone, and dial the number you wish to Call

Upon receiving a busy signal, press DIAL TONE RESET (the large button below the keypad) to bring on a dial tone.

Press REDIAL

Note

Redialing may be used to send a fax. See Chapter 2.

3-3