7)Dry Timer (50728) Replacement Procedure:
▪
▪
▪
▪
▪
▪
▪
Unplug the unit.
Remove the top panel (Two screws behind and slide back)
Pull out the soap dispenser, plastic washer knob and dryer knob. Remove the control panel. (3 Screws)
Unfix the two screws that hold the dry timer and take out the timer. Pull out all the wires on the dry timer and replace the same.
Fix all the parts back by following the reverse procedure.
Wiring: Dry Timer
TAB | b |
|
TAB1
b1
TAA1
a1
TAA | a |
|
Testing Procedure:
TAC
▪Cold Test:
1)Turn the dryer knob to 30 and check for continuity between terminals a & a1, b & b1.
2)Check the resistance between TAC and a terminals, it should not be more than 2300 ohm.
ePlease Note: The side with b & b1 should be on the top.
18
