Volume UP Button, Volume Down Button | Ericsson LBI-39110 specification

VOLUME UP BUTTON

Increases the volume level. 15 is the maximum level.

VOLUME DOWN BUTTON

Decreases the volume level. 00 is the minimum level unless programmed otherwise.

Numeric Portion

DURING A CALL - sends the DTMF tone for #.

Provides a pause during keypad entry of the DTMF numbers. This function is activated, when a first number 0..9 of the request telephone number was pressed.

Extended Features - 1

—

Enters telephone numbers and activates extended features.

Press first then one of the following keys or buttons.

Ramps through the system list and selects a system.

DURING A CALL - sends the DTMF (Dual-Tone Multi-Frequency) tone for *.

IN DISPATCH MODE - brings up the dial tone.

Ramps through the group and channel list and selects a group or channel .

Key	Function	Comments
	ALERT	Enables/disables the horn
		alert feature. Once to turn
		on, again to turn off.
	TIME	Displays call timer (active if
		call is in progress, last call
		length if call is not in
		progress).

Page 12

Image 12

Ericsson LBI-39110 manual Volume UP Button, Volume Down Button, Numeric Portion, Extended Features, Key Function Comments

Contents

Operators Manual Table of Contents Table of Contents Important Safety Information Safety Information Product has been exposed to rain or moisture orList of possible hazards follows Explosive Atmospheres Liquefied LP Gas Powered Vehicles Operating ProceduresDynamite Blasting Caps Radio Frequency EnergyPage Introduction Page User Interface Button KeypadFunction Portion Momentarily Press Recalls numbers from memory locations Volume UP Button Volume Down ButtonExtended Features Numeric Portion Enables/disables For placing/storingDuplex operation Locks the radio Status Indicators FCNPWR Serv Not used Indicates the radio’s keypad is locked Alert TonesEdacs Applications Call Originate Alert Call Queued Autokey System BusyCall Denied OUT of Range System Inoperative Volume Adjust Operation GeneralTurning The Radio ON/OFF Edacs Operation Key System Selection-Direct Number EntryGroup Selection-Ramping Names Group Selection-Direct Number Entry Locking The Radio Programmable Flex KeysInterconnect Dialing Redial Key Using Special Call Lists Individual Call NotificationStoring An Individual Call ID Storing a Telephone Number To The Call List Recalling calls from the call listSimplex Operation System Key usage Call Timer CLR key Usage Last Digit Clear And Display ClearAlert Key Unit. To enable the external mic, press EXT MIC HandsfreeSimplex Mute Scan Scan ADD/DELETESPC Pause Carrier Control Timer CCT Operator enters or . The length of pause is PC programmableProgrammable Options Call Time-outs Automatic Login Supervisory ModeTX Disable-Group Option Rx Disable-Group Option Cleaning Instructions Battery Voltage IndicatorLow Battery Alarm Control Channel Limits Care and Maintenance Inserting and Removing a BatteryStandard Battery Removal Insertion Optional High Capacity Battery Removal Slide Indicator Using Rapid Multi-Charger Charging a Battery Out of the PhoneRecharging Plug the AC converter into an AC outlet Charging Your Battery Charging While the Battery is in the Phone Locate the end of the battery with round charging contacts Removing BatteryUsing the Rapid Travel Charger Using Smart Charging Accessories Restoring Battery CapacityAllow the radio to remain on until it turns itself off MAh Standard Battery Available OptionsOption Frequently Called Numbers Page Page Page Warranty Emergency Numbers

VOLUME UP BUTTON

VOLUME DOWN BUTTON

Numeric Portion

DURING A CALL - sends the DTMF tone for #.

Extended Features - 1

Key

Function

Comments

TIME