Programmable Options, Call Time-outs | Ericsson LBI-39110 manual

operator enters or . The length of pause is PC programmable.

PROGRAMMABLE OPTIONS

Call Time-outs

The Allegra Duplex Portable provides several time-out options to accommodate user needs.üThey are summarized below:

Carrier Control Timer (CCT)

This timer is provided to limit continuous transmit time (when not in a duplex mode of operation). A single value can be selected that applies to

all trunked operation. Each conventional channel has the option of enabling or disabling the timer on a

üper channel basis. Voice Scan Lockout Timer

Provides a time limit that disables group scanning following initiation of a voice call.

üSpecial Call time-out

Drops the radio out of special call mode after a specified period of operator inactivity.

Individual/Interconnect Call time-out

A time-out that drops the radio out of an individual/interconnect call after a specified period of time.

Emergency

Any one of the three Flex Keys (A, B, or C) can be programmed to function as the emergency button.

If the radio is programmed as a supervisory radio, it is allowed to clear emergencies from the system. When the message “EMRGNCY” is

displayed, pressing the button followed by

the Emergency button (combination A, B, or C) causes the radio to attempt to clear the emergency.

25

Image 25

Ericsson LBI-39110 manual Operator enters or . The length of pause is PC programmable, Programmable Options, Call Time-outs

Contents

Operators Manual Table of Contents Table of Contents Important Safety Information Product has been exposed to rain or moisture or Safety InformationList of possible hazards follows Explosive Atmospheres Operating Procedures Liquefied LP Gas Powered VehiclesDynamite Blasting Caps Radio Frequency EnergyPage Introduction Page Keypad User Interface ButtonFunction Portion Momentarily Press Recalls numbers from memory locations Volume Down Button Volume UP ButtonExtended Features Numeric Portion For placing/storing Enables/disablesDuplex operation Locks the radio FCN Status IndicatorsPWR Serv Alert Tones Not used Indicates the radio’s keypad is lockedEdacs Applications Call Originate Alert Call Queued System Busy AutokeyCall Denied OUT of Range System Inoperative Operation General Volume AdjustTurning The Radio ON/OFF Edacs Operation System Selection-Direct Number Entry KeyGroup Selection-Ramping Names Group Selection-Direct Number Entry Programmable Flex Keys Locking The RadioInterconnect Dialing Redial Key Individual Call Notification Using Special Call ListsStoring An Individual Call ID Recalling calls from the call list Storing a Telephone Number To The Call ListSimplex Operation System Key usage CLR key Usage Last Digit Clear And Display Clear Call TimerAlert Key EXT MIC Handsfree Unit. To enable the external mic, pressSimplex Mute Scan ADD/DELETE ScanSPC Pause Operator enters or . The length of pause is PC programmable Carrier Control Timer CCTProgrammable Options Call Time-outs Supervisory Mode Automatic LoginTX Disable-Group Option Rx Disable-Group Option Battery Voltage Indicator Cleaning InstructionsLow Battery Alarm Control Channel Limits Inserting and Removing a Battery Care and MaintenanceStandard Battery Removal Insertion Slide Indicator Optional High Capacity Battery Removal Charging a Battery Out of the Phone Using Rapid Multi-ChargerRecharging Plug the AC converter into an AC outlet Charging While the Battery is in the Phone Charging Your Battery Removing Battery Locate the end of the battery with round charging contactsUsing the Rapid Travel Charger Restoring Battery Capacity Using Smart Charging AccessoriesAllow the radio to remain on until it turns itself off Available Options MAh Standard BatteryOption Frequently Called Numbers Page Page Page Warranty Emergency Numbers