Storing A Telephone Number To The Call List
The number of dial locations (10, 20, 30, 40, or 50) available is set through radio programming. The maximum number of digits stored in any location is 14. The user may dynamically add phone numbers to the call list by following these steps:
1.Enter the phone number, then 
,
followed by 
.
2.Enter the two digit storage location for the number (00 to 50).
The new phone number is now added to the call list at the specified location.
Recalling calls from the call list
Each
. Alternately, the user can scroll through the
call list using the 
key to scroll forward through the list.
Simplex Operation
The user can choose to terminate duplex operation and still maintain the interconnect call in
progress by pressing 
followed by 
. This key sequence toggles between simplex and duplex operation.
*/System Key usage
The 
/System ramp button is used in multiple contexts. When pressed while in monitor mode (i.e. radio is not in a special or interconnect call) the radio ramps through available systems in
one direction. If 
followed by 
/System is pressed, system ramping takes place in the opposite direction. If this key is pressed
after any key other than 
the 
is returned.
21
