Escient DVDN-552 user manual Recording from the Internal CD

RECORDING FROM THE INTERNAL CD

The easiest way to get music into your FireBall is to record CDs using the built-in internal CD-RW drive. This method requires no additional equipment and is very fast, as the internal CD drive can rip audio at several times the speed of normal playback. This is known as “fast-ripping”.

Follow these steps to record using the internal CD-RW drive:

1.Press the EJECT key on the front panel.

2.Insert an audio CD (label side up) into the CD-RW tray.

3.Press the EJECT key again to close the CD-RW tray.

4.The CD’s artist, album, and track names are automatically retrieved from the Gracenote® Music Recognition Service and are displayed on your TV.

5.Press the RECORD key on the remote control to display the Recording Options Menu.

6.Press the RECORD key a second time to choose the default recording option “Record to Internal Hard Drive”.

7.The Record Select Guide will be displayed showing the current CD with checkmarks to the right of each track name.

8.Press the RECORD key a third time to begin recording the entire CD to the internal hard drive.

•When recording is complete, FireBall will return to the Music Guide.

•Repeat steps 1-8 for each disc in your music collection.

•Highlight and Unselect tracks you do not wish to record before pressing RECORD for the third time.

Note: It is also possible to set the FireBall to automatically record the CD when insert. Refer to the section “Setting User Preferences” for setting Recording Preferences and Disc Insert Preferences.

PAGE 40

FireBall™ DVDM-552 User’s Manual