Escient FP-1 user manual Direct Access Codes, Page

Note: You can make a printout of this information by using the FireBall Web Server Interface. Connect to your FireBall’s IP address and look under Setup/ Direct Access Codes.

DIRECT ACCESS CODES

Direct Access Codes are used in conjunction with the MACRO key on the remote control to provide an IR code sequence to access just about any media in your FireBall server. This is useful for programming third-party external control systems and programmable IR remote controls such as the Marantz RC9500.

The Direct Access Codes are available for all music and movie titles, playlists, groups, and radio stations.

Follow these steps to view the direct IR codes for your FireBall content:

1.Press the Setup key on the remote to display the FireBall setup menu.

2.Select the External Control menu item.

3.Select the Direct Access Codes menu item.

4.Select which codes you want to view: a. Music Titles

b. Music Discs

c. Music Playlists d. Music Groups e. Radio Stations

f.Movie Discs

g.Movie Groups

PAGE 61

FireBall™ FP-1 User’s Manual