Escient MP-200 user manual Serial COM Ports

SERIAL COM PORTS

The Serial Control COM Port setting is used to specify which RS-232 serial COM port is to be used for two-way external control communications with a third party control system.

If there are no available COM ports, you must use the Ethernet based external control for two-way external control communications with a third party control system.

Follow these steps to select which serial port to use for external control:

1.Press the Setup key on the remote to display the FireBall setup menu.

2.Select the External Control menu item.

3.Select the IR & Serial menu

4.Select the Serial Control COM Port menu item.

5.Select which serial port to use for external control.

FireBall™ MP-200 User’s Manual

PAGE 80